Moderation Log
#21
"Gbolduev The Quack" thread title changed to "Quack Discussion" due to the original thread starter's request to draw less attention to "Gbolduev". The thread starters original post was also removed and one instance of that post being quoted as part of the same request.
#22
User kishml, banned for 5 spam posts about para sails.
#23
User bilitesmashhad banned for spamming the following message in 16 threads about the Istanbul Museum of Islamic Art:

" موزه هنرهای اسلامی استانبول

موزه هنرهای اسلامی استانبول که همان کاخ معروف ابراهیم پاشا صدر اعظم سلطان سلیمان است در سال ۱۵۲۴ به دستور وزیر اعظم ساخته شد.این بنابزرگترین بنائی بود که در تاریخ دوره امپراطوری عثمانی ساخته شد. مجموعه موزه شامل آثاری از قرون هشتم تا نوزدهم میلادی است. شاخص‌ترین‌های آن نمایشگاه بسیار زیبایی از خوشنویسی و ابزار و ادوات آن، فرمان‌های شاهی، طغرا‌ها، و نسخ خطی آرایش یافته است. در بزرگترین تالار قصر (آخرین اتاق طبقه اول) رحل‌های قرآن زیبایی از قرن ۱۶،مینیاتور‌های تركی و مجموعه بسیار نفیسی از كهن‌ترین فرش‌های دنیا نگهداری می‌شوند. در این موزه همچنین، سرامیک‌های ارزشمند، اشیاء فلزی و چوبی هنری و پارچه‌های كهن نگهداری می‌شوند.
موزه هنرهای اسلامی استانبول اولین موزه در برگیرنده اثار معماری اسلامی – ترکی است.جمع آوری این آثار در قرن نوزدهم شرع و در 1913 به پایان رسید.آثار جمع آوری شده در سال 1982 به کاخ ابراهیم پاشا که یکی از آثار به نام معماری قرن 16 است انتقال یافت.این کاخ از نظر قدمت و جذابیت در خد کاخ توپ کاپی است.این کاخ موزه دارای بخشهای مختلفی مانند بخش فرش آثار سنگی و چوبی قوم نگاری و بخشهای مختلف دیگر است ضمن اینکه بعضی از آثار موجود در این موزه بسیار خیره کننده و مسهور کننده است. "
#24
User Adam10 banned for spamming laptop repair service advertisements.
#25
User banned for spamming this post:

"Get Direct Admission in B.Tech in Engineering Colleges in Bangalore. At way2admission you will not only get secured admission for top Engineering Colleges in Bangalore but also the cheapest rate for management quota seats dr ambedkar institute of technology Admission,Atria Institute of Technology admission,Brindavan College of Engineering Admission.


We are having the best network across all the Engineering Colleges in Bangalore and hence we provide direct admission in B.Tech/M.Tech either through institute level vacant seats or management quota seats KNS Institute of Technology Admission,Nagarjuna College of Engineering Admission,RNS Institute of Technology direct admission.

Below are the list of Engineering Colleges in Bangalore where we provide direct admission in B.Tech Courses.
SJB institute of technology management quota
Sapthagiri College of Engineering admission
RR Institute of Technology Admission
Sri Krishna Institute Of Technology Admission
Venkateshwara College of Engineering Admission
JSS Academy of Technical Education direct admission"
#26
User crushermachine23 banned for their only spam post:

"In the sand production line, the role of the sand making machine is to make the final shaping of the material. After analyzing the production of the sand making machine, SBM found out the conditions that must be met to influence the performance of the sand making machine. Only after such conditions are met, can the production activities of the sand making machine remain efficient and stable.
Then, what are the conditions for the efficient production of the sand making machine?
1. In the setting of the feeding device of the sand making machine, a more uniform process specification must be used. This minimizes the difference in size at the time of feeding. Under such conditions, the sand making machine will be very fast once it is operated, and with the increase of the inertial force, the fluency achieved will be very high.
2. During the selection process of the crusher cavity of the sand making machine, we found that the crushing cavity, which is not narrow and long enough to allow the material to stagnate for a long time, can promote the effective sand making operation of the sand making machine. This requires us to determine the timing of the most time-consuming steps in the overall process. Under normal circumstances, in the case of medium and low yields, we choose the 2-3 cavity design, and in the case of high yield, we choose to The even compact design of the cavity of the cavity.
3. In the chamber design of the sand making machine, the simplified structure of a cavity requires us to achieve the right control of the grain size control. Not all granular control theory can be applied to the working chamber design of this type of sand making machine. After comparing the excellent manufacturing processes, we found that U-shaped crushers are the most suitable for this production need.
4. The new high-performance sand making machine production line needs to control the grain shape. We use an incentive-based computer control system for granular control. The benefits of this approach are very autonomous and automated. If the grain shape does not meet the requirements, it will be impossible to break out the cavity. When some cavity-type mechanism adjustment operations occur, full-automatic sensing installation saves labor costs.
5. The sorting and screening of the sand making machine can be laid at the discharge of the sand making machine in order to reduce unnecessary losses. "
#27
User Moana, banned for a post spamming links for the following:

"CA Coaching Classes in Bangalore
CA Training institutes in Bangalore
CMA Training Institutes in Bangalore

Coaching classes in Bangalore
CS Coaching Classes in Bangalore
CS Training institutes in Bangalore
cma usa coaching classes in bangalore"
#28
User ErikSoto deleted for spam/link spam:

"Now dissertation writing is the one of the important and major task of the academics. Selecting a topic for high quality dissertation is not easy task, but it is extremely important to choose a current and relevant topic. A well-chosen topic ensures that we can more easily write a qualitatively high-quality dissertation. Anyone tell me the tips for selecting relevant topic for writing best dissertation paper?"
  


Forum Jump: